XILINX Zynq7000 SoC FPGA Development Board XC7Z020


          • Model

            AX7Z020/ AX7Z020B
          • Email

          • Ean

          • Price

            $ 360


          Notice for purchase: 

          This series of development boards include AX7Z020 and / AX7Z020B

          Only the Ethernet interface chips of the expansion board are different, and the functions are the same.

          The two models will be delivered randomly according to the inventory, please distinguish them according to the QR code label.

          Xilinx Zynq-7000 FPGA Development Board

          Xilinx FPGA introduction development


          Techinal Support

          AX7Z020 Supporting Verilog HDL Demos and Docuemnts
          All Doucments Saved in Dropbox, after buy the board, email to get it.

          Course_S1_Basic Tutorial
          Part 01: Software Package Introduction and FPGA Board Inspection
          Part 02: Introduction to ZYNQ
          Part 03: Vivado development environment
          Part 04: PL's "Hello World" LED experiment
          Part 05: HDMI output experiment
          Part 06: Experience ARM, bare metal output "Hello World"
          Part 07: PS timer interrupt experiment
          Part 08: PS MIO Experiment
          Part 09: PS EMIO Experiment
          Part 10: PL AXI GPIO Experiment
          Part 11: Ethernet Experiment (LWIP)
          Part 12: Custom IP experiment

          Part 13: Use VDMA to drive HDMI display
          Part 14: Install virtual machine and Ubuntu System Part
          Part 15: Ubuntu installs the Vivado software for Linux
          Part 16: Petalinux tool installation
          Part 17: NFS service software installation
          Part 18: Customizing Linux with Petalinux
          Part 19: Develop Linux programs using the SDK
          Part 20: GPIO experiment under Linux
          Part 21: HDMI display under Petalinux
          Part 22: Use the Debian 8 desktop system
          Part 23: Making QSPIFlash boot Linux

          Course_S2_SDK Application Tutorial
          Part 01: PS side UART read and write control
          Part 02: Use of XADC
          Part 03: I2C read and write
          Part 04: CAN bus read and write
          Part 05: RS485 Test
          Part 06: PL read and write PS DDR data
          Part 07: Realize PS and PL data interaction through BRAM
          Part 08: Use of dual core AMP
          Part 09: Use of Free RTOS under ZYNQ
          Part 10: DMA loop test
          Part 11: Use of DMA--DAC waveform generator (AN108)
          Part 12: Use of DMA--ADC oscilloscope (AN108)
          Part 13: Use of DMA--ADC oscilloscope (AN9238)
          Part 14: Use of DMA--ADC oscilloscope (AN706) Part 15: Use of the SG DMA based on ADC module (AN108)
          Part 16: Use the SG DMA based on DAC module (AN9767)

          Part 17: OV5640 camera acquisition display (1)
          Part 18: OV5640 camera acquisition display (2)
          Part 19: Binocular camera Ethernet transmission
          Part 20: SD card read and write operation BMP picture display
          Part 21: SD card read and write operation camera capture
          Part 22: MIPI acquisition and display based on AN5641 module (Only for AX7Z020)
          Part 23: Audio module AN831 recording and playback
          Part 24: Use of 7 inch LCD module
          Part 25: 7-inch touch screen GUI and touch control
          Part 26 Ethernet Transmission--ADC Acquisition Based on AN108 Module
          Part 27: Ethernet Transmission--ADC Acquisition Based on AN9238 Module
          Part 28: Ethernet Transmission--ADC Acquisition Based on AN706 Module
          Part 29: Remote update QSPI Flash based on UDP/TCP

          Course_S3_HSL Application Tutorial
          Part 01: Getting to Know HLS Part
          Part 02: Status Indicator LED
          Part 03: Floating Point Coprocessing
          Part 04: Video Color Bar
          Part 05: Video Frame Buffer Read and Write Management
          Part 06: Image Scaling Overlay

          Part 07: Character Overlay
          Part 08: Image Contrast Adjustment
          Part 09: Auto Focus
          Part 10: Edge Detection
          Part 11: Corner Detection
          Part 12: Fast Fourier Transform                    

          Course_S4_Linux Application Tutorial
          Part 01. QT Application on ZYNQ
          Part 02. OpenCV application display of USB camera
          Part 03. Binocular camera module OpenCV display
          Part 04. Touch screen module application
          Part 05: AXI DMA Read and Write Test

          Part 06: DMA-based ADC Waveform Display  (AN926)
          Part 07: DMA-based ADC Waveform Display   (AN706)
          Part 08: Autorun petalinux application
          Part 09: Appendix - Linux Common Commands                

          Product Package


          AN831 Collection Package

          AN9767 Collection Package

          AN706 Collection Package

          AN9238 Collection Package

          Video Package

          Luxury Package

          FPGA Board

          Downloader Cable USB





          Binocular Camera

          7-inch LCD

          Package supporting module, click to learn more



          Audio Module



          Dual-Channels DA Module



          8-Channels AD Module



          Dual-Channels AD Module


          Binocular Camera Module



          Capacitive LCD Screen

          Key Features

          ·Core Board SOM

          AC7Z010 020EN.jpg

          *Learn More about the Core Board, Click to View >

          ·FPGA Board


          Product Parameters

          Main Parameters

          FPGA Board


          FPGA Chip

          XA7z020-1clg400I / XC7z020-2clg400I


          Dual-Core ARM Cortex-A9


          DDR3,1GB,Data Rate 1066Mbps

          Logic Cells


          Look Up Tables (LUTs)


          CLB Flip-Flops


          DSP Slices


          Block RAM


          PS MIO


          PL IO


          Interface and Function


          JTAG Interface to Debug and Download ZYNQ System

          Ethernet Interface

          10/100/1000M Adaptive Ethernet with RJ-45 Interface Used for Data Exchange with Computers and Other Network Equipment


          HDMI Image and Video Input/Output Interface, Supports 1080@60Hz

          USB HOST

          Used for Connect USB Peripherals such as Mouse, Keyboard and U Disk

          USB Uart

          Used for OTG Communication with PC or USB Device

          CAN Bus

          2 CAN Bus Interface, for User CAN Communication Service


          2 RS485 Interfaces, 485 communication Services for Users

          AD Interface

          2 SMA Interfaces, Used for Analog Signal Input and Voltage Conversion

          Real Time Clock

          RTC with a Battery Holder, The Battery Model is CR1220(Voltage 3V,Buy it yourself)

          QSPI FLASH

          256Mbit, Used for Storage of System Files and User Data


          4 User LEDs, 2 Power LEDs, Cofiguration LED


          4 User Keys, 1 Power Switch, 1 Reset Key

          Crystal Oscillator

          33.333Mhz, Provide Stable Clock Source for the PS System
          50MHz, Provide Extra Clock for PL Logic

          SD Card Slot

          Insert Micro SD TF Card, Store Operating System Image and File System

          MIPI Interface

          Used for connect with MIPI Camera Module [available only for AX7Z020]

          Expansion Port

          Two 40-Pin Expansion Ports (0.1 inch Pitch), Expand the 68 IOs Connect with 7 inch LCD Screen, Camera, AD/DA and Other Modules.


          EEPROM 24LC04 with IIC Interface

          Temperature Sensor

          Temperature Sensor chip LM75, used to detect the temperature of the environment around the board

          Power Supply Parameters

          Voltage Input

          +5V DC

          Current Input

          Max. Current 2A

          Rating Lable



          Package List

          FPGA Board


          TF Card


          Mini USB Cable


          Card Reader


          5V Power Adapter


          USB Downloader Cable


          Mini USB Cable



          Structure Size

          Size Dimension

          Core Board: 1.38 inch x 1.65 inch, Carrier Board: 5.12 inch x 3.54 inch

          Number of Layers

          12-Layer Core Board PCB, 8-Layer Carrier Board PCB,Reserved Independent Power Layer and GND Layer


          Linux Operating System

          Dual-Core ARM Cortex-A9

          With a Super Combination of Memory DDR3


          AI Intelligence/Industrial

          Automation Camera Acquisition System

          Intelligent Identification, Medical Security, Vehicle Digital, Industrial Control, Smart Grid


          Dual Lens Camera Module On-Board Demo

          The Binocular Camera Module AN5642 for Video Capture, and Displays it on the Monitor through the HDMI Interface of the ZYNQ Development Board. The ZYNQ Development Board Runs the Linux Operating System, and the Video Data is Displayed Using QT to Realize Binocular Display Simultaneously.

          Data Collection Display

          Signal Data Acquisition System

          AN9767/AN706 Module On-Board Demo


          The Signal Source Output Signal is Connected to the AN9767/AN706 Module,and is Displayed to the Monitor through the HDMI Interface of the ZYNQ Development Board. Run the Linux Operating System and use QT to Draw Waveform Data. The Whole Process Involves Data Transmission BetweenPL and PS, and Software Development under the Linux System.

          The warranty period of all products sold is 12 months, of which FPGA chips and LCD screens are wearing parts and are not covered by the warranty. All accessories and gifts are not covered under warranty.

          Alinx Electronic Technology (Shanghai) Co., Ltd. 滬ICP備13046728號